IMPORTANT - PLEASE READ!

Looking to purchase DTF transfers in bulk? This is the listing you need. Gang sheets allow you to purchase multiple images while saving money.

What is a DTF transfer? Direct to Film (DTF) is a printing method used mainly for decorating garments, especially T-shirts, hoodies, and other textiles.

How the DTF process works

1. Design is printed onto a PET film using special DTF inks (usually CMYK + white).

2. Adhesive powder is applied to the wet ink on the film.

3. The film is cured (heated) so the adhesive melts and bonds to the ink.

4. The film is placed on the garment and heat-pressed.

5. The film is peeled away, leaving the design on the fabric.

To get started, just upload your designs with our Sweet Gang Sheet Builder.  A little HINT....make sure your image is trimmed around all sides so you get the exact size image when uploading, If there is space around your image this can calculate into the size of your design. Also double check that your design is the correct size with the size guide to the left hand side of your canvas.  Your image does not necessarily upload to the size you created it so be sure to double check your sizes.  PLEASE remove any white background in your image, as this will print.

Please leave enough space around your images for cutting.

For the following we recommend, but totally up to you

For large designs please allow a maximum of 28cm for your width, any wider and your design will be cut off!

WE DO NOT EDIT YOUR GANG SHEET.  YOUR GANG SHEET WILL BE PRINTED THE WAY YOU HAVE UPLOADED IT. WE ARE NOT RESPONSIBLE IF YOUR HAVE INCORRECTLY SIZED YOUR DESIGNS.

All submitted graphics must be print quality. Minimum 300dpi. PNG required (no JPEG).   Lower quality graphics do not print well. PLEASE NO SCREENSHOTS!

All our DTF transfers are printed in house on our commercial printer.